Double Tempered Glass Sliding Door

Aluminum Alloy Entrance Tempered Glass sliding door
 

 automatic sliding door  can be used for single leaf automatic sliding door or bi-parting automatic sliding door. it can be also applied to framed or frameless glass door. With specially-designed 4.2m aluminium track and cover(standard length 4.2m, could be cut as per customer's need), low-noise round type brushless motor, non-digital or digital microcomputer controller,  microwave induction sensors(German Innosent chip), optional remoter control device or function keypad switch, it is easy to install, debug, operate and maintain and able to meet various requirements of different automatic doors.
 

There are three main methods for the operation of modern automatic doors:

• 1 Foot pedal type: a pressure switch is installed under the pedal.
• 2 Photoelectric beam type: A light beam emitting device and a photoelectric sensing device are disposed near the door.
• 3 Button mode: Press the button like a switch to open the door leaf. The automatic door opens and closes the door leaf by sliding, hinge or folding. In order to prevent theft, special equipment must be installed at the same time. For example, an automatic door for a home needs to be equipped with a person identification device or a television monitor, and the personnel outside the home are strictly restricted. 

Technical Data of automatic glass door:

Automatic sliding glass door operator for door and frameless glass doors:
 

(1) Motor:
The motor is brushless 24 VDC with built-in optical sensor for precise movement, quiet operation, maintenance free, high torque and high operating speed.

(2) Controller:
The intelligent controller unit can be programmed to connect to any safety/alarm system, self-monitor and calibrate, and store all data for door travel and brake position.

(3) Ups:
The operator has built-in uninterruptible power (battery backup) operation and safety during a power failure.

(4) Belt drive:
The drive is through a toothed belt that is reinforced by a fiberglass tensile member and has a nylon facing surface for protecting the teeth on the pulley. This combination produces a silent and accurate operation.

(5) Locking:
Electromechanical locking: Provides an electronic locking option for complete safety and can be adjusted without manual locking, ie: E. Frameless tempered glass doors. The lock is a microprocessor controlled electric lock system. The microprocessor monitors all aspects of the lock function. EG When the lock is 100% engaged, make sure the door is completely closed. The terminal output can be used to signal the door position and lock status to the safety system. If the movement is blocked,

(6) Safety:
The door operation will automatically reverse in either direction and the sensitivity setting will be programmable.
 

Why choose our products?
 

1) Security: When the door is running, the resistance will automatically start the reverse sliding function. The infrared electronic eye is used to detect the obstacle, and the door can automatically avoid it.

2) Low noise: Special fiber nylon guide rail - self-lubricating nylon weighing pulley structure, effectively reducing noise during operation

3) Convenience: Multiple functions allow you to select the normally open, automatic, pass and lock status according to your needs. It is convenient to set and adjust the opening speed, closing speed, keeping open time, etc.

4)Generalized: Suitable for office buildings, storefronts, banks, factories, restaurants, hotels, shopping centers, laboratories, hospitals, etc., to ensure the smooth flow of people walking and cargo transportation.
 

5) With high elasticity and density hanger roller. Dual system to prevent door dislocation during operator and easy to adjust door alignment and positioning.

6)  Various accessories available: mode selector, lock device, battery pack and sensors.

7) Vibration-proof structures.

8)  Warranty: 18 months

9)  Motor power control system with automatic reversal for user safety

10)  Anti-pinch function makes the operator more safe and more reliable.

11) Door will be able to operate about 200 times(open and close) during a power failure.

12) Five different functions with remote control function keypad: Always open, half open, exit only, lock, normal open.
13)  Good solution for accessories, for example, finger printer, remote control, push button, access keypad, security sensor, fire alarm, digital wireless video entry and so on.

The accessories: